Capacity analysis of 4R3216 Raymond mill

4R3216 Raymond mill is a commonly used model of Raymond mill and also grinding equipment for flour milling enterprises. It has 4 grinding rollers, the feed port size is 20-25mm, the finished product fineness is 30-425 mesh, and the processing capacity is 1.8-4.5t/h. The equipment has a large crushing ratio, and the crushed finished particles are small and uniform. So, how much does the 4R3216 Raymond mill produce per hour? The detailed analysis is as follows.

Factors affecting the capacity of Raymond mill

1. The output of 4R3216 Raymond mill is affected by the processing fineness. For example, if the material is about 100 mesh, the Raymond mill can reach about 3.2-4.5 tons per hour, and the material is about 200 mesh. The output is about 2.4-3.1 tons per hour. If it is processed to 300 mesh, the output is about 1.8-2.5. Therefore, the higher the user's requirements for the fineness of the processed material, the lower its production capacity will be.

2. 2. In general, the moisture content of the material is within 6%. If it exceeds this standard, the material will adhere to the machine during grinding, resulting in a decrease in production efficiency, and even blocking the circulating air duct, the analyzer discharge port, etc., which will not only reduce the output but also affect the quality of the Raymond mill.

3. The quality and wear resistance of the equipment will also affect its production capacity. The stronger its processing capacity, the higher the work efficiency and production capacity.

4. The mill should be fed evenly. If it is too fast, it may cause blockage; if it is too slow, the mill will be "hungry", both of which will affect the equipment's production capacity.

Raymond mill production line configuration

From the initial crushing and screening of raw materials to the fine grinding, and then to the classification collection and dust removal of finished products, the production line of the R3216 Raymond mill has formed an efficient and environmentally friendly automated production line. In particular, it is equipped with an advanced dust removal system, which effectively reduces dust pollution during the production process and conforms to green production.

How to choose a suitable grinding mill

There is a wide range of grinding equipment on the market, so it is important to select the equipment that best suits your company's needs. The following suggestions are for your reference:

First, you should clarify your production scale, raw material characteristics, and finished product particle size, and select the appropriate model based on this.
Pay attention to key performance indicators such as the processing capacity, energy consumption, stability, and wear resistance of the grinding mill.
Choose a brand with a good reputation, professional team, and perfect after-sales service to ensure timely technical support and maintenance during the use of the equipment.
If conditions permit, it is necessary to conduct a field investigation at the manufacturer and listen to feedback from other users.



In short, many factors affect the output of the grinding mill, and its processing fineness, material humidity, and equipment quality will be related to the 4R3216 Raymond grinding mill. For more grinding equipment, please call for a consultation.