What to do if the Raymond mill makes noise?

Raymond Mill is mainly used in chemical, construction, and other industries. Due to the influence of the production environment and grinding materials, noise is inevitable. However, if there is abnormal noise, the grinding equipment should be checked immediately and solved immediately.

Causes of noise in Raymond mill

Generally, the noise of Raymond mill will appear in the main engine and blower of the equipment. If the noise is from the main engine, check whether the anchor bolts of the Raymond mill are loose; and check the wearing parts of the Raymond mill, such as grinding rollers, grinding rings, scrapers, etc. If the grinding rollers and grinding rings are severely worn or deformed, it will inevitably cause noise and reduce the working efficiency of the Raymond mill. In this case, these accessories should be replaced.

If the noise is from the blower system of the Raymond mill, check the blades of the blower and analyzer, the precipitated material should be cleaned, and the internal circulation air duct and outlet of the Raymond mill should be kept unobstructed. If the wear is severe, the blades need to be replaced.

Measures to solve the noise of Raymond mill

1. Stop the machine for inspection
Once the Raymond mill has abnormal noise, it should be stopped for inspection immediately to avoid the expansion of the fault.

2. Detailed investigation
1. Check whether the surface of the grinding roller is severely worn, and replace or repair it if necessary.
2. Check whether the bearing is intact and lubricated. If damaged, it should be replaced in time.
3. Check whether all fasteners are loose, especially the connection between the grinding roller fixing device and the transmission component.
4. Clean the impurities in the material to ensure that the material is suitable for the processing capacity of the current mill.

3. Professional maintenance
If the above measures cannot solve the problem, or you are not sure how to operate, you can contact our professional technical team in time. We have rich maintenance experience and professional testing equipment, which can quickly locate the cause of the fault and provide effective solutions.

Prevention and maintenance of Raymond mill

1. According to the requirements of the equipment manual, perform equipment maintenance regularly, including replacing worn parts, cleaning dust, etc.
2. Understand the correct use and precautions of the equipment to avoid failures caused by improper operation.
3. Strictly control the quality of material to prevent materials with excessive hardness or impurities from entering the mill.

Conclusion

As important equipment in mining and powder processing, the stable operation of Raymond Mill is crucial to the production efficiency and product quality of the enterprise. We recommend that you strengthen the daily maintenance and maintenance of the equipment to prevent similar problems from occurring. As a professional manufacturer of mining grinding equipment, MASCOT will always provide you with high-quality products and comprehensive technical support. Welcome to call us for consultation or visit our factory.