27
27
25
Choosing a grinding mill is a long-term decision. Whether you plan a limestone line for building materials, calcite powder for paint or plastics, or quartz for glass and ceramics, the machine you select today determines your capacity, product quality and operating cost for years to come. A wrong decision rarely shows up on the day the mill arrives - it shows up months later, when output is short of target or the energy bill is higher than planned.
Zhengzhou Mascot Industry, an ISO9001:2015 certified manufacturer of crushing and grinding equipment, has collected the questions buyers ask most often during MTW mill negotiations. This article answers the top ten with actual specifications and documented field results, so you can evaluate any quotation with confidence.
Experienced buyers ask about the whole lifecycle of the machine: price, capacity, fineness, feed size, installation, energy, wear parts, after-sales, payment terms, and how to verify performance. The ten questions below cover these ten areas, and every answer is based on published specifications and documented field results.
Here are the ten questions buyers ask, with straight answers based on the MTW series specifications.
The honest answer is that price depends on configuration. The MTW series has four models - MTW110, MTW138, MTW175 and MTW215 - and the quotation is decided by the model, main motor power, classifier, auxiliary equipment and delivery scope. A complete line is priced differently from a single mill body. Send an inquiry with your material, target fineness and required capacity to get an accurate figure. T/T, L/C and PayPal are accepted.
The MTW series covers a wide capacity range: the MTW110 produces 3-10 t/h, the MTW138 6-20 t/h, the MTW175 10-35 t/h and the MTW215 20-50 t/h. Plan a margin below the maximum when the target is 250 mesh (approximately 0.058-0.063 mm), because finer product reduces throughput. Example: an MTW175 line in Southeast Asia, installed in August 2025, grinds limestone with feed up to 40 mm and moisture below 5 percent to 250 mesh, running at 31 t/h against a target of 28-32 t/h with 99.6 percent availability.
The MTW mill produces powder from 0.038 mm to 0.2 mm (80-425 mesh), controlled by a variable-speed classifier that can be adjusted without stopping the machine. As a reference: 250 mesh is approximately 0.058-0.063 mm, 325 mesh approximately 0.043-0.044 mm, and 400 mesh approximately 0.037-0.038 mm.
Feed size limits are 30 mm for the MTW110, 35 mm for the MTW138, 40 mm for the MTW175 and 45 mm for the MTW215. The series suits materials with Mohs hardness below 7 and moisture below 6 percent. For harder or stickier feed, plan a pre-crushing or drying step, and Mascot's engineers will configure the upstream equipment during design.
Delivery and installation are often confused. In the Southeast Asia case, the complete MTW175 line was manufactured in 18 working days, and on-site installation and commissioning took 28 days. The schedule depends on site preparation and local labor, but modular design keeps assembly fast. Mascot provides installation guidance and worker training on site.
The MTW series is engineered around energy efficiency. The ratio, in tons per hour per kilowatt, is 0.18 for the MTW110, 0.22 for the MTW138 and the MTW175, and 0.23 for the MTW215. The trapezoid roller and ring improve grinding efficiency by 20-30 percent, the bevel gear transmission reduces loss by about 15 percent, and the curved air duct lowers internal resistance. In the Southeast Asia case, energy consumption was 22 percent lower than a traditional mill.
Wear life depends mainly on the feed material. For limestone and calcite, the roller and ring typically last 8-12 months; for quartz, 4-7 months. In the Southeast Asia project, wear parts lasted more than 10 months and maintenance cost was 20 percent below budget. Replace the roller and ring in pairs to keep grinding efficiency stable.
Mascot maintains a complete spare parts system for the MTW series, and the thin-oil lubrication system needs an oil change only every 4 months. After-sales includes timely technical responses, maintenance guidance, and engineer support during installation and commissioning. As an ISO9001:2015 certified company, production and inspection follow a standardized quality system.
Payment terms are flexible: T/T, L/C and PayPal are all accepted, so you can choose the method that fits your company's procedures. Delivery terms should be discussed together with model selection, because the scope of supply affects both the total value and the shipping arrangement. A typical complete line includes the GZ2 feeder, TH400 bucket elevator, LQM72-7 dust collector and LSY273 screw conveyor.
Three practical ways: send a sample of your material for a grinding test, and Mascot will prepare a free project design based on the result; visit the factory to see the manufacturing and quality control process; and ask for reference cases such as the Southeast Asia MTW175 line. A serious supplier will be happy to provide all three.
Beyond the ten questions, think about the three-year plan. A mill that meets today's demand may be too small when the market grows, and an oversized mill wastes capital and energy at low load. Discuss your growth projection with the supplier so the model leaves an upgrade path - for example, adding a second line, as the Southeast Asia customer is doing in April 2026.
The second issue is total cost of ownership: price is only part of the lifetime cost, since energy, wear parts, maintenance and downtime all add up. The MTW series addresses each - 20-30 percent better grinding efficiency, about 15 percent less transmission loss, oil changes every 4 months, dust below 20 mg/m3, and PLC control that keeps the mill at its design point. When comparing quotations, ask every supplier for the same three numbers: output at your fineness, energy per ton, and wear part life.
Yes. Mascot can supply a complete line including the GZ2 electromagnetic feeder (0.25 kW), TH400 bucket elevator (5.5 kW), LQM72-7 pulse dust collector (11 kW) and LSY273 screw conveyor (3 kW), designed together so all stages match.
The MTW series suits materials with Mohs hardness below 7 and moisture below 6 percent, including limestone, calcite, quartz, barite, dolomite and many other non-metallic minerals. For a specific material, a grinding test on your own sample is the most reliable confirmation.
The ten questions cover the complete decision path for an MTW mill purchase: price, capacity, fineness, feed size, installation, energy, wear parts, after-sales, payment and verification. The MTW series offers four models covering 3-50 t/h and 80-425 mesh, with proven energy savings in field operation. Send your material details to Mascot for a free project design, and ask for the specification sheet of the MTW Trapezium Grinding Mill before comparing quotations.
About of Mascot
Zhengzhou Mascot Industry is a high-tech mining equipment company integrating R&D, manufacturing, sales, and after-sales service. Focusing on crushing, grinding, and mineral processing equipment, we provide professional solutions to our customers. We are ISO9001:2015 certified, and our products include mobile crushing plants, crawler crushing plant, construction waste crushing plants, jaw crushers, sand making machines, cone crushers, fine crushers, grinding mills, ball mills, etc., all with reliable performance to meet diverse project needs.
• Professional pre-sales support: Free project design and comprehensive solutions to help you accurately select the right equipment;
• Comprehensive on-site service: Providing installation guidance and worker training to ensure smooth equipment commissioning;
• Reliable after-sales guarantee: A complete after-sales system, timely response to technical inquiries and equipment maintenance, ensuring long-term stable operation.
To protect your rights, please contact us through the following official channels for professional service:
WhatsApp: 0086-16650273865
Email: mascot@mascotenv.com
We are committed to providing high-quality equipment and full-cycle services to deliver comprehensive intelligent solutions for the global mining industry!
This production line utilizes a three-ring medium-speed micro-grinding mill as the central equipment, complemented by other auxiliary equipment like hammer crushers, bucket elevators, and storage silos to establish a comprehensive grinding operation system. It has demonstrated strong potential for application and market competitiveness in industries such as construction, chemical industry, and new materials.
The high-pressure grinding mill production line is a project specially designed for efficient grinding operations. It is widely used in metallurgy, building materials, the chemical industry, highways, water conservancy hydropower, and other industries. It is a suspended roller mill that uses springs to increase pressure. It can achieve efficient grinding processing of various non-metallic raw materials. It has high efficiency, stability, and environmental protection characteristics.
The gypsum grinding production line is an efficient, stable, and environmentally friendly production solution, which is widely used in construction, decoration, the chemical industry, and other fields. In addition, the grinding process is particularly critical, which directly affects the quality and particle size of the final product. With the continuous development of science and technology, the technical level and production efficiency of gypsum grinding production lines will be further improved, providing strong support for the development of the gypsum processing industry.
The Raymond mill production line is a highly efficient system designed for grinding operations, with a focus on energy efficiency, durability, and productivity. It caters to the needs of users by offering fine powder products in non-metallic ores, coal powder, and slag processing, aiding enterprises in achieving sustainable growth.
The ball mill production line is a comprehensive production line that integrates material crushing, grinding, grading, and collection. This production line is mainly used to process various materials, including sand and gravel, cement, new building materials, silicates, refractory materials, fertilizers, ferrous metal beneficiation, non-ferrous metals, glass ceramics, etc.
Green and Intelligent Mining Machinery
Manufacturing and Export Base
Based on high quality and perfect after-sales service, our products have been
exported to more than 120 countries and regions.
Copyright © 2023 Zhengzhou Mascot Environmental Technology Co., Ltd Record number: Yu ICP No. 13021523-4
WhatsApp