What Makes YGM High Pressure Grinding Mill Stand Out From Ordinary Raymond Mill?

1. Market Analysis & Product Overview of YGM High Pressure Grinding Mill

With the continuous development of the non-metallic mineral processing industry, downstream industries such as building materials, chemical engineering and power plants have put forward higher requirements for powder yield, fineness uniformity and production cost. Traditional ordinary grinding mills are limited by structural design, suffering from insufficient grinding pressure, low output and high unit energy consumption, which can no longer adapt to large-scale and high-efficiency production demands. To solve these industry pain points, our R&D team optimizes the internal structure of the traditional grinding mill and launches the YGM High Pressure Grinding Mill series products.

Different from conventional grinding equipment, YGM High Pressure Grinding Mill adds a high-pressure spring device on the grinding roller assembly, which can provide continuous and stable extrusion force during operation. The overall equipment adopts a three-dimensional compact layout, covering a small floor area and forming an independent closed production system from raw material feeding to finished powder output. The whole set of equipment operates under negative pressure, which avoids powder leakage. It is applicable to various materials with moisture content below 6%, including limestone for construction, barite for oil drilling mud, gypsum for building materials and kaolin for chemical fillers. The finished powder fineness can be flexibly adjusted between 80 mesh and 425 mesh, and can reach up to 1000 mesh for partial materials, fully meeting diversified powder application standards in different industries.

2. Main Technical Parameters of YGM High Pressure Grinding Mill

Mascot provides multiple models of YGM High Pressure Grinding Mill to match different production capacity and on-site conditions. The core main engine parameters are shown in the table below:

The complete YGM High Pressure Grinding Mill production line is composed of main grinder, vibrating feeder, bucket elevator, high-efficiency classifier, pulse dust collector and PLC control cabinet. All core components are processed with high-standard technology. The grinding roller and grinding ring are made of high-chromium wear-resistant alloy, which greatly prolongs the service life of vulnerable parts. The whole machine adopts overlapping multi-stage sealing structure to effectively prevent dust from entering the bearing assembly and reduce equipment failure rate.

3. Core Advantages of Mascot YGM High Pressure Grinding Mill

As an upgraded product of traditional grinding mill, YGM High Pressure Grinding Mill has multiple competitive advantages in production efficiency, energy consumption, operation and maintenance:

1. Higher grinding pressure and larger output: The built-in high-pressure spring increases the rolling pressure by 1.2 times compared with ordinary grinding mills. Under the same power and fineness requirements, the output is increased by 20% to 30%, helping customers expand production scale rapidly.

2. Remarkable energy-saving performance: The optimized material layer grinding mode reduces invalid friction inside the equipment. The power consumption per ton of materials is reduced by about 15% to 25%, which cuts long-term production costs significantly for large-scale processing lines.

3. Wide application range and flexible fineness adjustment: It can process materials with Mohs hardness up to 9.3 and moisture below 6%. The finished powder fineness can be adjusted freely, covering coarse powder, medium fine powder and partial ultrafine powder to satisfy multi-scene usage demands.

4. Low failure rate and easy maintenance: There are no exposed bolts and rolling bearings in the grinding cavity, avoiding equipment damage caused by loose parts. The wear-resistant parts have long replacement cycles, and the disassembly and maintenance process is simple without professional tools.

5. Green and environmental friendly operation: Matched with high-efficiency pulse dust collector and silencing device, the dust emission concentration is far below international standards, and the operating noise is controlled within 70dB, meeting strict environmental protection regulations in various regions.

4. Detailed Customer Application Case

A large mineral processing enterprise in West Africa has been engaged in barite powder processing for many years. The finished barite powder is mainly supplied to local petroleum enterprises as weighting agent for drilling mud. The original production line adopted traditional Raymond mill, with many drawbacks: low single-machine output, high power consumption, unstable powder fineness, and excessive workshop dust. In 2025, the enterprise decided to renovate all old equipment and expand production capacity. After comparing products from multiple manufacturers, the customer finally chose two sets of Mascot YGM 130 High Pressure Grinding Mill production lines.

Our professional technical team completed production line layout, equipment installation, commissioning and operator training within 38 working days. After official operation, the two sets of YGM 130 High Pressure Grinding Mill run continuously for 24 hours. The single machine’s actual processing capacity reaches 10t/h, and the finished barite powder is stably maintained at 200 mesh with uniform particle size, fully complying with the quality standards of petroleum drilling materials. After half a year of stable operation, the customer gave detailed feedback: Compared with the old Raymond mill, the total daily output of the production line increased by 45%, the overall power consumption decreased by 22%, and the workshop dust problem was completely solved thanks to the supporting dust removal system. In addition, the wear-resistant parts of YGM High Pressure Grinding Mill have a long service life, and the monthly maintenance time is reduced by more than half. At present, the enterprise plans to add three more sets of YGM High Pressure Grinding Mill production lines and establishes a long-term strategic cooperative relationship with Mascot Heavy Industry.

5. Supporting Auxiliary Equipment Parameters

The complete set of YGM High Pressure Grinding Mill production line is equipped with a full range of supporting auxiliary equipment to ensure continuous, stable and efficient operation. The main auxiliary equipment parameters are listed in the table below:

All supporting equipment is manufactured and matched by our factory, with perfect compatibility with YGM High Pressure Grinding Mill. We can also customize the combination of auxiliary equipment according to customers’ raw material characteristics, site space and special production requirements to create exclusive one-stop grinding solutions.

6. Related Equipment Recommendation

According to different production scales, material types and fineness requirements, we recommend matched equipment for users of YGM High Pressure Grinding Mill:

1. Raymond Mill: Suitable for small-scale production lines that only need conventional fineness powder below 400 mesh. It can be used together with YGM High Pressure Grinding Mill to build a mixed production line of multi-specification powder.

2. Micro-Powder Grinding Mill: Recommended when customers need to produce ultrafine powder above 1000 mesh. It forms a coarse and fine combined grinding process with YGM High Pressure Grinding Mill to expand product categories.

3. Rotary Dryer: If the raw material moisture exceeds 6%, the dryer can be equipped to reduce material moisture below 6%, effectively avoiding material adhesion and blockage inside YGM High Pressure Grinding Mill.

7. Frequently Asked Questions (FAQs)

Q1: What raw materials are not suitable for YGM High Pressure Grinding Mill?

A1: This equipment is designed for non-flammable and non-explosive materials with Mohs hardness ≤9.3 and moisture ≤6%. It is not applicable to hard materials such as iron ore and steel slag with Mohs hardness higher than 9.3, as well as wet viscous materials with moisture exceeding 8%. These materials will cause severe wear of grinding rollers and grinding rings, and lead to material blockage inside the mill.

Q2: Why does the powder fineness of YGM High Pressure Grinding Mill become uneven during operation?

A2: The main reasons include abnormal operation of the classifier, uneven feeding speed, serious wear of grinding rollers and grinding rings, or insufficient air volume of the fan. Solutions: Check and debug the classifier to ensure stable operation; adjust the vibrating feeder to keep uniform feeding; replace severely worn vulnerable parts; inspect and maintain the fan to guarantee normal air volume circulation.

Q3: How to maintain YGM High Pressure Grinding Mill to extend its service life?

A3: First, strictly control the feed particle size, and prohibit hard impurities such as iron blocks from entering the grinding cavity. Second, keep raw material moisture within the standard range to prevent material adhesion. Third, conduct regular lubrication for transmission parts and bearings every week, and carry out a comprehensive equipment inspection every month. Standard daily maintenance can extend the service life of key vulnerable parts by more than 25%.

About of Mascot

Zhengzhou Mascot Industry is a high-tech mining equipment company integrating R&D, manufacturing, sales, and after-sales service. Focusing on crushing, grinding, and mineral processing equipment, we provide professional solutions to our customers. We are ISO9001:2015、certified, and our products include mobile crushing palnts, crawler crushing plant,construction waste crushing plants, jaw crushers, sand making machines, cone crushers, fine crushers,grinding mills, ball mills, etc., all with reliable performance to meet diverse project needs.

Our advantages:

• Professional pre-sales support: Free project design and comprehensive solutions to help you accurately select the right equipment;

• Comprehensive on-site service: Providing installation guidance and worker training to ensure smooth equipment commissioning;

• Reliable after-sales guarantee: A complete after-sales system, timely response to technical inquiries and equipment maintenance, ensuring long-term stable operation.

To protect your rights, please contact us through the following official channels for professional service:

Official Website Customer Service

WhatsApp: 0086-16650273865

Email: mascot@mascotenv.com

We are committed to providing high-quality equipment and full-cycle services to deliver comprehensive intelligent solutions for the global mining industry!