What To Do If Raymond Mill Has a High Temperature?

According to relevant regulations in my country, the maximum ambient temperature of electrical equipment is 40 degrees. If the ambient temperature of electrical equipment exceeds this value in summer, most electrical equipment should reduce capacity to avoid damage to the edge. As a large-scale equipment, Raymond mill is prone to failure when working at high temperatures for a long time. In addition, the friction between the mills during operation will also generate a lot of heat, which aggravates the failure rate. So how to solve these problems? The following are some solutions to the high temperature of Raymond mill:

What to do if Raymond Mill has a high temperature?

1. If you want to solve the problem of heating Raymond mill parts, you need to know the parts where the Raymond mill heats up. The heat in the Raymond mill is mainly concentrated in the rotation position of the moving parts of the Raymond mill, including the main machine bearing and the fan bearing. Therefore, it is necessary to pay attention to it, add lubricating oil in time, and reduce friction.

2. After lubrication, sealing should be done well. If the sealing of the mill is not done well during lubrication, the lubrication effect will be halved.

3. Ventilate and work indoors as much as possible. The temperature of direct sunlight outdoors is too high, and the machine is easily damaged for a long time.

Raymond Mill Precautions

1. The mill needs to regularly clean and lubricate the internal and external parts of the ball mill, remove dust and impurities, and add an appropriate amount of lubricating oil to the lubricating parts. In addition, it is necessary to regularly check the worn parts of the mill, such as grinding stones, grinding discs, grinding rollers, etc., and replace damaged parts in time. At the same time, it is also necessary to pay attention to the normal operation and safety of the electrical equipment and safety devices of the mill.

2. The Raymond mill is not allowed to add oil at will during normal operation. To ensure production safety, if the Raymond mill makes abnormal noise in any part, or the load suddenly increases, it should be stopped immediately for inspection and troubleshooting to avoid major accidents. When starting the machine again, the remaining material in the machine must be removed, otherwise the current will be too large when starting the machine, affecting the startup, and even burning the equipment in serious cases.

Summary

To prevent the Raymond mill from having high temperatures during use in summer and affecting production, manufacturers need to use high-temperature resistant materials when producing the machine, to prevent the impact of high temperatures on the Raymond mill. Usually there are many reasons for high-temperature problems, and there may be several reasons at the same time. The specific reasons should be analyzed according to the operating conditions of your Raymond mill. For more knowledge on Raymond mill maintenance, you can consult online.