High-Efficiency Ultra-Fine Grinding Solution for Industrial Minerals

Overview of HGM Micro-Powder Grinding Mill

HGM micro-powder grinding mill is a new generation of ultra-fine grinding equipment independently developed by Mascot Heavy Industry, aiming at the high-demand ultra-fine powder processing market. It is widely used in non-metallic minerals, chemicals, metallurgy, building materials, coatings, papermaking and other fields, and can grind limestone, calcite, dolomite, barite, talc, gypsum and other materials into 300-3000 mesh ultra-fine powder. With the integration of grinding, classification, conveying and dust collection, HGM micro-powder grinding mill realizes high-efficiency, energy-saving and environment-friendly automatic production, which is the ideal equipment for large-scale ultra-fine powder processing.

Core Advantages of HGM Micro-Powder Grinding Mill

1. High Grinding Efficiency: Adopting multi-dimensional grinding technology and optimized impeller classifier, the grinding efficiency is increased by 30%-50% compared with traditional mills, and the output is stable and reliable.

2. Wide Fineness Adjustment Range: The finished product fineness can be freely adjusted between 300-3000 mesh, with high classification accuracy and uniform particle size distribution, meeting different high-end application needs.

3. Energy Saving and Environmental Protection: The whole equipment has good sealing performance, equipped with high-efficiency pulse dust collector, zero dust emission, low noise, and fully meets environmental protection standards.

4. Long Service Life of Wear Parts: The grinding roller and grinding ring are made of high-strength wear-resistant alloy materials, with long service life, reducing the frequency of replacement and maintenance costs.

5. Intelligent Control System: Equipped with PLC automatic control system, realizing one-key start and stop, remote monitoring and fault alarm, simple operation, reducing labor input.

6. Stable and Reliable Operation: The whole machine has a compact structure, stable operation, small vibration, and can run continuously for a long time to meet the needs of large-scale industrial production.

Key Technical Parameters of HGM Micro-Powder Grinding Mill

Application Case of HGM Micro-Powder Grinding Mill

A non-metallic mineral processing enterprise in South America needed to process calcite ultra-fine powder of 1250 mesh for plastic filling. After many comparisons and tests, the enterprise finally chose Mascot HGM micro-powder grinding mill production line. The equipment was installed and commissioned smoothly, and the actual operation effect exceeded expectations: the processing capacity reached 3.5 t/h, the finished product fineness was stable at 1250 mesh, the whiteness was high, and the particle size was uniform. Compared with the original equipment, the energy consumption per ton of powder was reduced by 28%, the dust emission was close to zero, and the annual operation cost was greatly saved. The customer spoke highly of the performance and service of Mascot HGM micro-powder grinding mill, and reached a long-term cooperation intention.

Supporting Equipment Recommendation for HGM Micro-Powder Grinding Mill

Frequently Asked Questions About HGM Micro-Powder Grinding Mill

Q1: What materials are suitable for HGM micro-powder grinding mill?
A: HGM micro-powder grinding mill is suitable for grinding various non-metallic minerals with Mohs hardness below 7 and humidity below 6%, such as calcite, limestone, barite, talc, gypsum, dolomite, marble, feldspar, etc.

Q2: How to adjust the fineness of the finished powder of HGM micro-powder grinding mill?
A: The fineness of the finished powder can be adjusted by changing the speed of the classifier. The higher the classifier speed, the finer the powder; the lower the speed, the coarser the powder. The adjustment is convenient and accurate, and can meet different fineness requirements.

Q3: What should be paid attention to in the daily maintenance of HGM micro-powder grinding mill?
A: 1. Regularly check the lubrication of each component and add lubricating oil in time; 2. Check the wear of grinding roller, grinding ring and other wearing parts, and replace them in time when they are seriously worn; 3. Keep the equipment clean and remove dust regularly; 4. Avoid feeding materials with excessive hardness or impurities to prevent damage to the equipment.

About of Mascot

Zhengzhou Mascot Industry is a high-tech mining equipment company integrating R&D, manufacturing, sales, and after-sales service. Focusing on crushing, grinding, and mineral processing equipment, we provide professional solutions to our customers. We are ISO9001:2015、certified, and our products include mobile crushing palnts, crawler crushing plant,construction waste crushing plants, jaw crushers, sand making machines, cone crushers, fine crushers,grinding mills, ball mills, etc., all with reliable performance to meet diverse project needs.

Our advantages:

• Professional pre-sales support: Free project design and comprehensive solutions to help you accurately select the right equipment;

• Comprehensive on-site service: Providing installation guidance and worker training to ensure smooth equipment commissioning;

• Reliable after-sales guarantee: A complete after-sales system, timely response to technical inquiries and equipment maintenance, ensuring long-term stable operation.

To protect your rights, please contact us through the following official channels for professional service:

Official Website Customer Service

WhatsApp: 0086-18737119558

Email: mascot@mascotenv.com

We are committed to providing high-quality equipment and full-cycle services to deliver comprehensive intelligent solutions for the global mining industry!